![](https://www.abexo.tech/wp-content/uploads/2024/03/MOVEO-grigia-disegno-32-300x300.png)
MOVEO
Read more
Manual barrier (stainless steel)
The MOVEO manual barrier allows you to demarcate access to a gateway up to 5.3 meters.
The foundation plate, fixing base and the external case are made of stainless steel.
The movement of the boom is balanced in all positions and the release is protected by key lock.
Five rod lengths available: 3 mt, 4 mt, 4.5 mt, 5.3 mt and 6 mt.
![](https://www.abexo.tech/wp-content/uploads/2023/05/foto-CONTROLGIR-300x300.jpg)
CONTROLGIR
Read more
"Parachute" brakes for sloping sliding gates
The CONTROLGIR line is indispensable for standardization in the presence of sliding gates on a slope ( it is necessary for there to be a rack). In case of unlocking of the automation gear motor, the internal hydraulic circuit (adjustable) has the function of "parachute," that is, to regulate the downward speed throughout the gate's travel. The operating speed should be adjusted just above that of the gearmotor so that it does not interfere with the automation.
CONTROLGIR-7
Braking system for sloping sliding gates - maximum slope 3,2° (7 Mn)
TECHNICAL DATA
M (required resistant moment): 7 Nm
Rack pitch: M4
Gate weight: 400 Kg (3920 N)
Slope: 3,2° MAX
Formula:
M [Nm] = P x sinß x 0,032
P = gate weight in Newtons (9.8N=1Kg)
sinß = sine of the tilt angle (ß= tilt in degrees)
P = 9.8 x 400kg = 3920 Newton
M = 3920 Newton x sin 3.2 x 0.032 = 7 Nm
CONTROLGIR-30
Braking system for sloping sliding gateCsO - mNaTxRimOuLmG IsRlo-p3e0 1 (33,90°N (3m0 )Nm)
TECHNICAL DATA
M (required resistant moment): 30 Nm
Rack pitch: M4
Gate weight: 400 Kg (3920 N)
Slope: 13,9° MAX
Formula:
M [Nm] = P x sinß x 0,032
P = gate weight in Newtons (9.8N=1Kg)
sinß = sine of the tilt angle (ß= tilt in degrees)
P = 9.8 x 400kg = 3920 Newton
M = 3920 Newton x sin 13.9 x 0.032 = 30 Nm
Data Sheet
![CREMAGLIERE M4 gamma di cremagliete in plastica e acciacio per cancelli scorrevoli](https://www.abexo.tech/wp-content/uploads/2022/02/CREMAGLIERE-imm-prod-300x300.png)
CREMAGLIERE M4
Read more
Tecnopolymer and steel racks for sliding gates
CRP500:
- Single bar lenght 1mt
- 6 mts pack of tecnopolymer rack
- N.5 central fixing elements module 4/ screws included
(5 screws per meter)
- Double sided toothing to make it usable on both sides
- No steel core: design and shapes studied to cancel any chance of strain
- Maximum capacity 500 kg
CRP700:
- Single bar lenght 1mt.
- 10 mts pack of tecnopolymer rack
- N.6 fixing elements module 4
- Maximum capacity 700 kg
CRP1200:
- Single bar lenght 1mt.
- 8 mts pack of tecnopolymer rack
- N.6 fixing elements module 4
- Maximum capacity 1200 kg
CRM3012:
- Single bar lenght 1mt
- 4 mts pack of galvanized steel racks (module 4)
- With bolts and spacers for wall mounting (to be welded)
Datasheet Tecnopolymer racks
Datasheet Steel racks
![COL cavi anticaduta per cancelli](https://www.abexo.tech/wp-content/uploads/2022/02/COL-imm-prod-300x300.jpg)
COL
Read more
Fall preventing cables for gates
COL53 and
COL70 are
Gate fall arrest cables made of
stainless steel with Ø 5 mm x 133 wire section, with 2 loops. Complete with sheath and eyelet lug.
Versions available:
- COL53, length 530 mm
- COL70, length 700 mm