MICRO FLASH
Read more
Wall flashing LED
MICRO FLASH is the innovative led flashing light designed to make the automation of garage doors better looking and high tech looking.
In the early years of spread of automatic gates the cost to have them was very high. The automation was economically for the few and the flashing light, installed in evidence, in addition to its role of signaller, was used as a status symbol: large and very showy.
Today the gate automation is affordable for many and the role of the flashing light has changed.
MICRO-FLASH is a small flashing light perfectly integrable in
the system because of its size, but at the same time gives the
maximum visibility during movement to signal the danger.
Discover the other universal led flashing lamps: BLINK (available with yellow and white lens),
ALF6 (wall-mounting, available with yellow and white lens),
VOLT.
Discover our spare universal led boards: RETROFIT and MEGARETROFIT, if you need megavisibility.
VOLT RETROFIT
Read more
Universal LED replacement board for flashing lights
By replacing the old incandescent bulb with the
RETROFIT board , hight
energy savings (circa 93%) thanks to the
6 LEDs with high luminous efficiency and
low power consumption, with power consumption < 2 watts. The Retrofit board also ensures a longer life of the flasher: in fact, the estimated life of the LEDs is about 50 times longer than traditional incandescent lamps.
Installation is easy thanks to the universal mounting base that is compatible with all popular brands of flasher, and the
universal power supply, 12V - 24V and 230V, allows its wide versatility in different installations.
Thanks to jumper JP1 it is possible to
select the type of light, steady or flashing.
Buzzer (beeper) optional.
For even more brightness,
find out MEGAretrofit, Retrofit' evolution : 18 led placed on the 4 sides.
MEGARETROFIT
Read more
Universal spare board with high luminous efficacy, 18 leds
Thanks to our long-term experience with the Retrofit spare board and to our constant research of electronical components, we designed a universal failsafe board: thanks to its 18 leds laid out all around, it guarantees
MEGA-visibility to your flashing lamp!
The wiring is made by
2 terminals from 12V to 230V ac and cc: thanks to the jumpers you can
select the current and the light mode, steady or flashing.
Its
18 LEDs laid out all around ensure excellent visibility to your system and
high luminous efficacy.
The optional buzzer can be placed outside the ashing lamp and the antenna is suitable for 433 and 868 Mhz frequencies.
BLINK
Read more
Universal LED flasher, multi-voltage
BLINK makes your installation simple and elegant, providing
low consumption and excellent visibility thanks to the built-in 6-LED Retrofit board.
It is equipped with a
wall mounting bracket and thanks to the jumper you can
select the type of flashing (steady or flashing light). All these features, together with the multi-voltage (12/24/230V) make the BLINK flasher perfect for any type of installation, allowing ample energy savings.
The BLINK flasher is also available with a white lens - BLINKW
Find out universal multi-voltage led boards:
Retrofit (9 leds, low consumption) and
MEGAretrofit, for megavisibility.
Find out the high luminous efficiency version:
MEGA-BLINK, 18 leds and IP67 buzzer built into the base.
POWERLED
Read more
LED flasher battery-operated and with motion sensor
Motion sensor with adjustable sensitivity. It mounts directly on
the lock (shutter, sectional door, gate) recessed or wall-mounted.
TECHNICAL DATA
- Without li and radio connection
- Illuminates the moving edge
- Power supply: no.3 AA LR 1.5V batteries
- Dimensions: 230x30x24 (prof) mm
Data Sheet
Instruction manual
VOLT
Read more
Universal LED flashing light
6-LED Flashing light with high efficiency and low power consumption.
VOLT consumes about 93% less energy than traditional indicators and the LEDs lifespan is about 50 times longer than traditional incandescent lamps. The flashing light is easy to install and has the IP65 degree of protection. The lamp offers the possibility to select between flash, fixed or alternating lights using a jumper.
Universal power supply, 12V – 24V and 230V.
The high quality of the product allows us to offer a 5 year warranty.
Also available in white.
Buzzer optional.
Discover the other universal led flashing lamps: BLINK (available with yellow and white lens),
ALF6 (wall-mounting, available with yellow and white lens) and
MICRO FLASH.
Discover our spare universal led boards: RETROFIT and MEGARETROFIT, if you need megavisibility.
TRAFFIC 1 (green/yellow/red)
Read more
LED Traffic light – LED signaller 12/24 Vdc
TRAFFIC 1 is a multi-tension LED signalling light with 1 lens: green, yellow or red.
Thanks to its compact dimension, innovative features and multi-purpose use, the range of our
TRAFFIC lights will fit your needs.
It has a
metal structure and brackets to fix the product
on the wall. One of its strengths is the
9 high-brightness
LEDs in each lens, that improve the light lifespan (about 50.000 hours of use compared to incandescent lamps with a lifespan of 8.000 hours of use).
Our TRAFFIC range is the ideal solution for different systems:
- Civil and industrial systems
- Gates and automatic barriers; access ramps
- Signalling the status of alarm systems and doors
Discover the other products of the TRAFFIC range:
TRAFFIC 2, LED traffic light – 2 lenses;
TRAFFIC 3, Led traffic light – 3 lenses.
TRAFFIC 2 (Green/Red)
Read more
Multi-voltage (12/24 Vdc) LED traffc light with two lenses: green and red
Innovative and elegant,
TRAFFIC 2 (two lenses) suits any kind of system, thanks to the
multi-voltage power supply (12/24 Vdc).
All the products of the TRAFFIC range have
metal structure and brackets to easily fix the product on the wall. Thanks to the the high-brightness
9 LEDs that compose each lens, our traffic lights guarantee high luminous efficacy and long life to this product, compared to classic bulbs: minimum size, maximum visibility.
TRAFFIC range is the ideal solution for several installations:
– Civil and industrial closures
– Gates and barriers automation; access ramps
– Status display for alarm systems and doors
MEGA-BLINK
Read more
Universal LED flashing light, multitension, with high luminous efficacy and integrated buzzer
MEGA-BLINK is a
universal multitension LED flashing light ideal to complete your system: the
IP67 integrated buzzer and the internal led board equipped with
18 leds, laid out
all around, ensure an excellent visual and acoustic activity when the automation is moving.
This flashing lamp is equipped with
wall-mounting bracket and thanks to its jumper you can
select the type of light (steady or flashing light). The internal electronic board (MEGA-RETROFIT) guarantees mega-visibility and
high luminous efficacy, thanks to its 18 leds laid out all around: 6 on the front, 6 on the rear and 3 per each side.
The MEGA-BLINK flashing lamp is also available without integrated buzzer.
Discover the two versions of the universal led multitension board: Retrofit (9 led, low consumption) and MEGAretrofit, mega-visibility - used in MEGA-BLINK.
Discover the other version of this flashing lamp: BLINK, 9 leds flashing lamp, low consumption.
TRAFFIC 3 (green/yellow/red)
Read more
LED Traffic light - LED signaller 12/24 Vdc
TRAFFIC 3 is a multi-tension LED signalling light with 3 lenses: green, yellow or red.
Thanks to its compact dimension, innovative features and multi-purpose use, the range of our
TRAFFIC lights will fit your needs.
It has a
metal structure and brackets to fix the product
on the wall. One of its strengths is the
9 high-brightness
LEDs in each lens, that improve the light lifespan (about 50.000 hours of use compared to incandescent lamps with a lifespan of 8.000 hours of use).
Our TRAFFIC range is the ideal solution for different systems:
– Civil and industrial systems
– Gates and automatic barriers; access ramps
– Signalling the status of alarm systems and doors
Discover the other products of the TRAFFIC range:
TRAFFIC 1, LED traffic light – 1 lens;
TRAFFIC 2, Led traffic light – 2 lenses.
Datasheet (pdf)
Instructions (pdf)
TRAFFIC COLUMN
Read more
Anodized aluminium column (12 x 2 x 149h cm) with a traffic light-two lights, red and green lens.
TRAFFIC COLUMN, the ideal solution for installations that
do not require wall fixing: the two lenses -red and green- of the Traffic traffic lights range guarantee a high luminous efficiency, and the
anodized aluminum of the column makes this product versatile and practical.
This solution combines the quality of Traffic 1 in
red lens and green lens (9 high brightness LEDs for each lens and metal structure) to the practicality of the column: it can be easily positioned where needed, thanks to the practical support base.
Discover the other traffic lights of the TRAFFIC range:
TRAFFIC 1 (red/yellow/green),
TRAFFIC 2 (red, green) and
TRAFFIC 3 (three lights: red, yellow, green).
MICRO TRAFFIC
Read more
LED traffic lights for pedestrian crossings
MICRO-TRAFFIC is a LED traffic light ideal for signalling the state of an alarm system or the state of a door in an access control system, without ruining the elegance of the automation.
Thanks to its
compact size and the tipical design of the MICRO line, it can be easily applied either on the wall or in the door jambs without affecting (ruin, dirty, etc.) the
elegance of the access points. The signal will be discreet, but still perfectly visible when working, thanks to
LED technology (the same as VOLT and ALF products).
The
steel/glass colours of the materials used match both the traditional doors and door frames in aluminium (or other material). The
back gasket, included in all of the products of the MICRO line, will guarantee a better grip on every type of wall and a better isolation.
Size: 70 x 27 x 16 mm
Discover the other products of the MICRO range: MICRO-P27S, micro photocell; MICRO-FLASH, micro flashing light.
Datasheet
User Manual (pdf)
MICRO RGB
Read more
Led signal light - RGB
MICRO-RGB is the innovative
micro led (RGB) segnal light, ideal to
monitor the status of an alarm system, a door or a access control system.
This signal light keeps the same
minimal design style and
reduced dimensions as the classic MICRO range, but offers a more modern result thanks to the
glass and steel colours which perfectly fit the contemporary aluminium window/door frames.
MICRO-RGB has a
3 poles terminal block (common and 2 poles for independent connection of the lights) and the combination of colours displayed on the signal light is decided by moving the dip-switches.
The fixing base is aliminium colour painted and the screws are well hidden to guarantee a very pleasant visual impact. The
rear gasket, typical of the whole MICRO range, ensure good isolation and perfect adherence on every kind of fixing surface.
Dimensions: 70 x 27 x 16 mm
Discover the other products of the MICRO range: MICRO-P27S, micro photocell; MICRO-TRAFFIC, micro traffic light rosso/verde; MICRO-FLASH, micro led flashing light.
RADIO KODA
Read more
Traffic light kits for manual access management
Suitable for small/medium user environments and ussi. Red/green traffic light signaling is controlled by an 868 Mhz two-channel radio transmitter. The operator manually counts the number of users in the area and selects via the transmitter the access or stop colors. The special conguration of the radio receiver eliminates the possibility of simultaneous lighting of the lanterns, and each channel of the transmitter controls the single colours.
Data Sheet
TRAFFIC CONTROL
Read more
Traffic light system management control units for driveways
Central management unit for 2-way traffic light systems. The TRAFFIC CONTROL control unit enables the management of traffic light systems two-way, thus with up to two traffic lights with 2 or 3 lights (230V or 24V). For example: alternating one-way street, ramp of an underground garage, strait, underpass. Thanks to the LCD display, you can easily program the control unit according to one of 3 operating logics: time-based, reservation-based with control devices or mixed logic.
TECHNICAL DATA
- Power supply: 24 Vac/Vdc
- Accessory power supply: 24 V max 0.5 A
- 3 control inputs: traffic light 1, traffic light 2, emergency
- Operating temperature: -20°C, +60°C
- Transformer included
Data Sheet
