HR50-UNI/BL

Category:

Versatile microwave unidirectional detection sensor

Activation sensor for sliding doors and swing doors robust and elegant suitable for mounting heights up to 4m.

TECHNICAL DATA

– Technology: microwave
– Supply voltage: 12-30 Vdc, 12-24 Vac
– Current consumption: 40 mA (24 VDC)
– Installation height: 4000mm max
– Temperature range: -30°C to +55°C
– Output: PhotoMOS (resistance Max. 35)
– Degree of protection: IP54
– Dimensions: 120 x 70 x 41.5 mm

Instruction Manual

REQUEST INFORMATION

Related products

  • 3H-IR14C/BL sensore infrarossi per porte scorrevoli a norma EN16005

    3H-IR14C/BL

    Read more
    Activation and safety of sliding doors in a compact sensor size, according to EN16005
    Infrared technology, dual relay output. TECHNICAL DATA - Technology: active infrared resection - Supply voltage: 12-24 Vdc/Vac ± 10% - Current consumption: 40 mA (24 VDC) - Installation height: 3000mm max - Temperature range: -20°C to +60°C - Output: SAFETY = NO relay contact / ACTIVATION = NO relay contact - Degree of protection: IP54 - Dimensions: 210 x 59 x 28.5 mm Data Sheet
  • HR100-CT/BL

    HR100-CT/BL

    Read more
    Advanced unidirectional detection sensor with monitored security system and exclusive "Door Learn" function
    Extraordinary state-of-the-art sensor capable of capable of ensuring the activation of doors pedestrian doors and unprecedented security at mounting heights no to 3m. TECHNICAL DATA - Technology: active infrared reflection - Supply voltage: 12-24 Vdc/Vac ± 10% - Current consumption: 60 mA (24 VDC) - Installation height: adjustable 2000-3000mm - Temperature range: -20°C to +60°C - Output: Open collector 7.5mA (Min) load resistor - Degree of protection: IP54 - Dimensions: 230 x 70 x 44 mm Data Sheet
  • INFRA2 Fotocellule con amplificatore infrarossi

    INFRA2

    Read more
    Infrared Barrier
    INFRA2 are miniaturised self-aligning modulated infrared photocell barriers with a range of 6 m at full power and 3 m at half power. They consist of: - amplifier card for two pairs of photocells with self-test function (fault signalling relay output) and dual relay output with contacts in series; - emitter/receiver pair complete with 8 m shielded cables; TECHNICAL DATA - Fixed optics Ø10,6mm - Power supply voltage: 12-24V AC +/-10% - 12-24V DC -5/+30% Data Sheet Instruction Manual
  • Radar per porte industriali a microonde - CAPTURE APP

    CAPTURE APP

    Read more
    Microwave motion sensor for industrial doors, configurable via App
    The CAPTURE radar is extremely versatile and provides a wide flexibility of use and installation due to the possibility of configuration of parameters, either through display oled or through APP. EASE OF INSTALLATION. It can be installed from 2 to 8 meters and the double joint system allows vertical and horizontal adjustment. In addition, the possibility of mounting along the full width of the automation allows it to be easily installed in a variety of situations. CONFIGURATION The radar allows easy configuration either through the built-in oled display or through the application. It is possible to change: the detection field size and sensitivity of the radar, hold open time, outputs (NO/NC), mode (direction) and type (vehicles/people) of detection. Thanks to the parallel traffic filter, automation opening can be avoided when it is not necessary. TECHNICAL CHARACTERISTICS - Power supply: 12-24Vac / Vdc - Technology: microwave - Installation height: 2-8 m - Degree of protection: IP65 - Emitted frequencies: 24.150 GHz - Max detection range: 34° x 80° - Tilt angle: 0° to 45° (vertic.); +30°, +15°, 0°, -15° -30° (horizon.) - Minimum detection speed: 5 cm/s, under optimal cond. - Power supply frequency: 50 - 60 Hz - Power consumption: <2W - Outputs: 2 NO/NC - Operating temperatures: -30°C,+ 60°C  
    CAPTURE APP DETAILS [video src="https://www.abexo.tech/wp-content/uploads/2022/03/CAPTURE_caratteristiche_video-UK_WEB.mp4"]
Top